The feature of the metal stamping tool

(1) （metal stamping tool)Stamping processing has high production efficiency, convenient operation and easy mechanization and automation. This is because stamping depends on stamping dies and stamping equipment to complete the processing. The stroke times of ordinary press can reach dozens of times per minute, and the high-speed pressure can reach hundreds or even thousands of times per minute, and each stamping stroke may get a stamping part.

(2) (metal stamping tool)as like as two peas are used to ensure the stamping parts' surface quality, the die life is generally longer. The stamping quality is stable and interchangeability is good, and it has the same characteristics.

(3) (metal stamping tool)Stamping can process parts with large size range and complex shape, such as the second hand of clocks and watches, automobile longitudinal beam and covering parts. Combined with the cold deformation hardening effect of materials during stamping, the strength and stiffness of stamping are high.

(4) Stamping generally has no chip and scrap generation, less material consumption, and does not need other heating equipment. Therefore, it is a material-saving and energy-saving processing method, and the cost of stamping parts is low.