How to do a good job of safety protection for
stamping tools and facilities to ensure the safety of stamping tools during use.
1. Various operating instructions and safety warnings should be posted on the
stamping tools;
2. The power distribution box door lock on the stamping tools should be equipped with a key, and the power supply can be automatically cut off when the door is opened;
3. When processing stamping, if there is a continuous stroke operation, there should be a pre-control action link during the operation;
4. The
stamping equipment should also have safety protection measures to prevent hands from entering the closed area of the mold.
5. In single or continuous, pedal stamping operations, the switch should be switched with a key lock;
6. The cables on the
stamping equipment should be prevented from aging and damage;
7.. The stamping equipment should also be equipped with an emergency stop button, and it should be able to self-lock;
8. The foot pedal type can be used on the pedal operation device, and the electric switch can be controlled by the foot pedal, and it can be reset automatically;
9. Stamping manufacturers should regularly test the electrical system, including protective grounding, insulation, withstand voltage test, etc., and attach a test report;
10. It is also necessary to ensure that the
stamping equipment has obtained the stamping equipment safety license and is used within the validity period.